iPod Shuffle USB Key Adapter/Charger

usbshufflekey1 usbshufflekey2 usbshufflekey3 usbshufflekey4
Parts used:

- Case from broken USB Key
-4 pole 3.5mm jack,
-USB connector.
Hot glue is used to secure both connectors to half of the usb key case.
Solder wires to connect the USB connector and the 4-pole 3.5mm jack.
Another view of the finished wiring.
usbshufflekey5 usbshufflekey6 usbshufflekey8
Finished view 1.

Hot glue is once again used to hold usb case halves together, as well as insulate the inner wiring.
Finished view 2.

That is the donor usb key above.
Charging the Shuffle via a USB port in Dell 2007fpw monitor.

Click on a picture to enlarge it.